General Technical Help for Sunwood, Timberlux, Santa Fe and Excel Wood Blinds
To enable you to get the correct size for your New Blinds, accurately measure the opening for both the Width and the Drop in 3 places as shown.
Make a small sketch of your window and accurately write down the sizes, always measure twice to check your measurements.
If possible it is best to measure in 'mm' to enable a more accurate Finish
State if the measurement taken is 'Inside / Recess' or 'Outside / Blind Size'
Blind Size - Your Blind is supplied at the actual width entered
Recess Size - Your Blind is supplied at less -12mm to allow for side Clearance.
All of our Wooden Blinds come complete and ready to fit with a Wooden Pelmet , Metal Box End Fixing Brackets and intermediate support Brackets which can be used if needed, fixing Screws, Child Safety Cord retaining clips and full fitting instructions.
Wood Blinds are generally easy to fit and can normally be fitted in 15-30 mins.
Wood Blinds are supplied with a pair of standard Metal End Fix Brackets and Middle Support Brackets depending on if required and on the Blind Width. Top Fix and Extension Top Fix Brackets can be provided for more difficult fixing situations, please email if required.
The Standard End Box Brackets fittingsare supplied colour matched to the Head Rail and fit onto the end of the Head Rail, their measurements are as follows.
Sunwood End Fix Box Brackets
Height = 46mm
Depth = 66mm
Width = 24mm
Timberlux/Santa Fe End Fix Box Brackets
Height = 55mm
Depth = 64mm
Width = 23mm
If you need an answer to any technical issues, help with measuring or fitting or any other general advice please contact us and we should be able to quickly help.
Office : 01268 961519
mobile : 07979 590990
